| Method: |
| |
 |
 |
1.
Roll natural clay into a 120mm x 120mm sheet and roll
Makin's Texture Sheet (Wave) over the top with Makin's
Roller. Cut sheet into shape with Makin's Cutters and
Roller Set. Cut out Windows with Makin's Clay Cutter Set
(Square). |
| |
 |
 |
2.
Following the size of the front, roll and cut a piece
of natural clay sheet into correct size and add strips
on it to make backing of frame. |
| |
 |
 |
3.
Use
Makin's Clay Extruder to extrude two navy blue ropes and
twist into a helix. Repeat with two more ropes and twist
in the opposite direction as before. Place on roof as
shown in diagram. |
| |
 |
 |
4.
Roll olive colored clay into a sheet and cut with Makin's
Clay Cutter Set (Circle) as shown in diagram. Texture
with Makin's Chisel. Roll olive colored clay into a long
string and cut into smaller sections as shown in diagram.
Mark one end with two stripes with Makin's Mallet. |
| |
 |
 |
5.
Roll terra cotta cay into long ropes and cut into sections,
then lay together as shown. Assemble all parts together
from steps 4 and 5 then secure with glue. |
| |
 |
 |
6.
Roll white clay into the shape of a lifesaver. Roll and
cut plum colored clay into small rectangular sheets and
wrap them around lifesaver as shown. Extrude light brown
colored clay with Makin's Clay Gun Extruder to make a
rope. Wrap rope around the lifesaver. |
| |
|
 |
7.
Roll gray colored clay into ropes to make the anchor.
Cut two small triangles of light brown colored clay and
attach to anchor as shown. Wrap black clay around the
arms of the anchor and place of a small into the depression. |
| |
|
 |
8.
Assemble pieces and secure with glue. After drying, paint
with acrylics to add color and tone. |
| |
| Designed
by - Dorothy Chan, MAKIN'S CLAY® Design Team
|
