| How: |
 |
|
 |
1.
Roll light yellow clay into a teardrop shape for the feet.
Bend to form a L-shape and shape the heels as shown. |
| |
|
 |
2.
Roll white clay into a 65mm long rope. Bend to form a
V-shape then hollow the two ends with the small stick
of Makin's Clay Mixing Ruler. Stick the feet inside the
holes as shown. |
| |
|
 |
3.
Roll white clay into a teardrop shape, stick it in place
as shown for the body. |
| |
|
 |
4.
Roll light blue clay into a thin, rectangular sheet. with
Makin's Roller. Cut an U-shape cloth according to pattern
shown with Makin's Roller and Cutter. |
| |
 |
 |
5.
Wrap the cloth around the body as shown. Trim the excess
at the back of the Angel with scissors. |
| |
|
 |
6.
Roll flesh colored clay into an egg shape for the head.
Cut a straw to size then press into the face for the eyes
and mouth as shown. Roll clay into a nose then stick onto
the face. |
| |
|
 |
7.
Extrude terra cotta ropes with Makin's Clay Gun Extruder.
Cut some of them shorter for the fringe. Coil each end
as shown. Stick them in place. |
| |
|
 |
8.
Stick and embed half toothpick into each shoulder for
the two arms later. |
| |
|
 |
9.
Roll light blue clay into two teardrop shapes. Hollow
the larger ends with small stick of Makin's Clay Mixing
Ruler. Shape as shown and press at the middle for the
folds with the handle of small stick of Makin's Clay Mixing
Ruler. |
| |
|
 |
10.
Roll flesh colored clay into teardrop shapes with palm.
Shape with the handle of small stick of Makin's Clay Mixing
Ruler as shown. |
| |
 |
 |
11.
Insert and stick the hands inside the holes of sleeves
with their thumbs pointing upwards. Measure a suitable
length and cut the sleeves ends. Stick in place with the
toothpick embedded beforehand as shown. |
| |
 |
 |
12.
Roll glow-in-the-dark clay into teardrop shapes. Flatten
them with Makin's Roller. Mark feather texture with Makin's
Mallet as shown. Stick in place. |
| |
 |
 |
13.
For making star:
Roll glow-in-the-dark clay into a sheet with Makin's Roller.
Cut out a star shape with Makin's Star Clay Cutters (Large).
Roll blue clay into a rope then wet the star surface then
shape the rope as shown to form the words. Place the star
into the angel. |
| |
| Designed
by - Dorothy Chan, MAKIN'S CLAY® Design Team
|
