|
Designed
by Provocraft
Skill
Level - Intermediate
Time to Complete - 5 hours (Does not include drying
time)
Supplies:
* Makin's Clay® - The No Bake Clay®
|
*
No Kneading, conditioning, or baking required!
60g
Green clay
60g
Neon Green clay
60g
Neon Orange clay
60g
Black clay
60g
White clay
60g
Natural clay
60g
Yellow clay
60g
Blue clay
60g
Red clay
Recommended
Tools:
Makin's Brand® Clay Texture
Sheet
Makin's Brand® Clay Gun
Extruder
Makin's Brand® Clay Tool
Set
|
 
|
Other
Materials:
Dog Life Vellum Stickers
Sizzix Fun Serif Alphabet
Pixie Serif Alphabet Letters
Alphabitties
Bitty Gone Big (yellow paper)
Font PC Leere
Family Frenzy
Wiggle Eye
Pigma Pen
Silver Pen
Thin cording
Yellow flowers
|
|
|
1.
For Parrot: mix Neon Orange and Yellow
Clay. Roll 1/4" thick and cut out legs using pattern.
Press texture onto legs using Dot Texture sheet. Cut
out beak pieces and press nose hole using Chisel tool.
Roll Neon Green Clay to 1/4" thick and cut out
main body and lightly mark overlap areas. Roll out Green
Clay to 1/4" thick and cut out tail, wings and
head. Texture wings and head using Chisel tip and making
lines. Assemble all pieces together. Roll small ball
of Neon Green Clay and press flat. Place on head and
push in wiggle eye. Let parrot dry.
|
 |
|
2.
For
Remote Control: roll Black Clay to 1/4" thick and
cut out using pattern. Roll eight tiny pieces of White
Clay. Form four into small triangles. Place all white
pieces on remote control as in picture. Press small
amount of Neon Green Clay in Clay Gun Extruder to make
small ropes. Shape into numbers 0-9 and place on clay
remote.
|
|
3.
For
Book: roll Red Clay to 1/4" thick. Cut into a 2"
by 1 1/4" rectangle. Roll Natural Clay as thin
as possible. Cut 4 to 5 rectangles, each 1 3/4"
by 1". Gently stack Natural Clay sheets and center
on top of red rectangle. Press a straight line down
center of sheets. Gently lift corners of "pages"
and bend as desired to make pages look as thought they
are turning. When completely dry, press on stickers
and write with pen.
|
|
4.
Cable: mix White and Black Clay to make gray. Press
through Clay Gun Extruder and shape cable. Put additional
clay on ends of cables to make them larger. When dry,
paint ends silver.
|
|
Final.
Shoe: roll Blue Clay to 1/4" thick and cut out
shoe pattern. Roll small amount of Orange Clay to 1/8"
thick and cut out shoe stripe. Place on shoe. Roll a
rope of White Clay and place along inner edge of shoe.
Roll a piece of White to 1/8"thick and cut out
inner shoe piece and tongue; lightly making overlap
areas. Place tongue behind shoe followed by inner shoe
piece as pictured. Texture shoe as desired by using
Clay Texture Sheet. Make holes for laces. Let dry and
thread shoe with cording; tie into bow
|
 |
Clay
