|
Designed
by Provocraft
Skill
Level - Intermediate
Time to Complete - 5 hours (Does not include drying
time)
Supplies:
* Makin's Clay® - The No Bake Clay®
|
*
No Kneading, conditioning, or baking required!
60g
Red clay
60g
Brown clay
60g
Blue clay
60g
Black clay
60g
White clay
60g
Green clay
60g
Yellow clay
Recommended
Tools:
Makin's Brand® Cutter Set
(Mini Geo)
Makin's Brand® Clay Gun
Extruder
Makin's Brand® Clay Cutter
(Round)
Makin's Brand® Clay Cutter
(Star)
Makin's Brand® Clay Texture
Sheet
Makin's Brand® Clay Tool
Set
|
 
|
Other
Materials:
Art Accentz Treasure Beadz by
Art Accentz Microfine Sparklerz Glitter by (Optional)
Rhinestones
Wiggle Eyes
|
1.
For Rocket: roll Red Clay to 1/8"-1/4" thick.
Cut out two rocket fins using pattern and lightly mark
overlap area. Roll Blue clay to 1/8"-1/4" thick.
Cut out rocket body using pattern and place on top of
rocket fins where indicated. Mix Yellow Clay with small
amount of
|
 |
Brown
Clay, blend in Glitter if desired. Roll to 1/8" thick
and cut out rocket tip using pattern and three diamond-like
shapes using Mini Geo Cutter Set. Place on rocket. Roll
three small balls of Blue Clay and press down at bottom
of rocket. Roll 3 small balls of Blue Clay and press down
at bottom of rocket. Press White Clay through Clay Gun
Extruder and attach strands to back of rocket. Let clay
pieces dry. When dry, arrange and glue pieces to paper.
|
2.
For
Planets: to marble clay, take the clay colors you want
and roll into ropes. Twist the ropes together and slightly
blend the clay together to marble it. Stop when you like
the way it looks. Roll clay flat and cut with circle cutter.
Leave plain, texture with texture sheet or make craters
using chisel tool.
|
 |
|
3.
For
Spaceship: mix Black Clay and White Clay to make gray.
Roll clay to 1/8"-1/4" thick. Cut out spaceship
using pattern. Roll Black Clay to 1/8" thick. Cut
out band using pattern. Place band on spaceship. Press
in rhinestones and texture spaceship using chisel tool.
|
|
4.
For Alien: mix Green Clay with small amount of Black
Clay until well blended. Mix newly blended Dark Green
with Green until marbled as desired. Roll marbled green
to 1/8"-1/4" thick. Cut out alien pieces,
lightly marking overlap areas. Put alien together and
press in eyes on face and Treasure Beadz on fingers.
Roll a thin rope of the marbled green and form mouth
on face. Make nose holes.
|
 |
5.
Wait
around 20-30 minutes for the log to dry and then slice
into flower shapes of 1~2 mm thickness.
|
|
Final.
For Stars: mix glitter into Yellow Clay if desired.
Roll clay to 1/8"-1/4" thick. Cut out stars
using smallest Star Clay Cutter and star from Mini Geo
Set. And allow to dry completely.
|
Clay
