Skill
Level - Advance
Time to Complete - 1-2 hours (Does not include drying
time)
Supplies: * Makin's Clay® - The No Bake Clay®
*
No Kneading, conditioning, or baking required!
60g
Yellow clay
60g
Brown clay
60g
Red clay
60g
Black clay
60g
White clay
Recommended
Tools:
Makin's Brand® Cutter Set (Animal)
Makin's Brand® Clay Gun Extruder
Makin's Brand® Clay Mixing Ruler
Other
Materials:
Black Bead for nose
Wiggle eyes
Aleene's Original Tacky Glue
Toothpicks
Wire
1.
Roll out Brown Clay 1/4" thick. Cut out head &
arms. Slightly bend arms. Press your finger tip in bear1s
ears. Using Clay Mixing Ruler, mix together E Brown +
F Yellow + G Natural and roll out 1/16" thick. Cut
out bear1s muzzle. Glue onto the head. With the tip of
toothpick, form line down the center of muzzle and add
a few dots to the cheeks, line eyebrows. Glue on eyes.
Glue black bead on for a nose or form a small ball out
of Black Clay to form nose. Let dry.
2.
Cut
a strip of clay 1" wide & 2" long. Wrap
the piece of clay around your finger. Moisten or glue
the seam then pinch at the top to pit finger tip. Allow
to dry well before gluing all together.
3.
With
the Red Clay roll out about 1/16" thick and cut out
bow tie. Press together at the center and glue on a small
ball to center of bow tie.
4.
For Bumble Bee: form egg shaped body & ball head from
Black Clay. Glue together and press the tip of clay tool
or toothpick to dot eyes. Glue a smaller ball of Brown
Clay for nose. Press Yellow Clay through the Clay Gun
Extruder using tiny round hole disk. Wrap one strand around
the bee body to make stripes. Using two small pieces,
form two loops for wings. Twist a piece of wire around
the toothpick. Attach to the back of the bear and poke
other end in the under side of the bee.
Final.
When the head, arms, and the finger tip cover are dry,
glue all pieces together.
Clay
