|
Designed
by Makin's Clay Design Team
Skill
Level - Intermediate
Time to Complete - 5 hours (Does not include drying
time)
Supplies:
* Makin's Clay® - The No Bake Clay®
|
*
No Kneading, conditioning, or baking required!
60g
Natural clay
60g
Brown clay
60g
Blue clay
60g
Black clay
60g
White clay
60g
Green clay
60g
Yellow clay
120g Red clay
|
 
|
Recommended
Tools:
Makin's Brand® Mallet
Makin's Brand® Chisel
Makin's Brand® Roller
Makin's Brand® Clay Cutter (Star – small size)
Makin's Brand® Clay Mixing Ruler
Other
Materials:
1 piece of 8” Red Ribbon or Gold
Cord
Aleene's Original Tacky Glue
Black Pen
|
| 1.
Roll out a thin piece of clay from a pack
of 60g Makin’s Black clay to make the penguin’s
head. Make it into a triangular shape and use Makin’s
Brand™ Mallet make the round corners. Slightly
press down the eyes areas. |
 |
2.
Take
out a piece of clay from a pack of 60g Makin's White
clay, roll it into a piece of thin flat clay and use Makin’s
Brand™ Mallet to cut out the penguin’s face.
|
 |
|
3.
Place
the White clay of the face on the penguin’s head.
|
 |
|
4.
Mix a thin piece of Yellow clay and Red clay to produce
the orange color using Makin’s Brand™
Clay Mixing Ruler (F(Yellow clay) + E (Red clay)). Roll
it into a cone and slightly press it to make the penguin’s
mouth.
|
 |
|
5.
Stick
the penguin’s mouth on the face. Draw a line for
the mouth of the penguin using Makin’s Brand™
Chisel.
|
 |
|
6.
Roll
out a thin piece of Natural clay to make a small round
ball and a rectangle. Roll out a little Red clay in
teardrop shape and bend the pointed side downward to
make the hat, use the Makin’s Brand™ Mallet
to shape and smooth.
|
 |
| 7.
Stick the small round ball at the end of the Red hat and
stick the rectangle between the hat and the penguin’s
head. Use Makin’s Brand™ Mallet to shape
the details of the hat. Then, use a black pen to draw
the penguin’s eyes. |
 |
| 8.
Take
out about 2/3 of the clay from a pack of 60g Makin’s
Brown clay to make the tree trunk, make it wider on the
lower part. |
 |
| 9.
Use
Makin’s Brand™ Mallet to press a hole
and mark the tree grain. |
 |
10.
Mix
Blue clay and Green clay to produce the Dark Green color
using Makin’s Brand™ Clay Mixing Ruler
(F (Blue clay) + F (Green clay)) totally four times, then,
roll it as the leaves using Makin’s Brand™
Roller, keep the thickness at 1mm. Cut the tree skirt
with Makin’s Brand™ Mallet.
|
 |
| 11.
Use
Makin’s Brand™ Mallet to make the leaves
grain. |
 |
|
12.
Prepare
4 different sizes of leaves and stick on the tree trunk
with the smallest one on top.
.
|
 |
| 13.
Roll
out a thin piece of Yellow clay, then, use Makin’s
Brand™ Clay Cutter (Star – small size) to make
a star. |
 |
|
14.
Stick
the star on the top of the tree with white glue. Roll
out thin pieces of Blue clay, Yellow clay, Red clay
and Purple clay as the decoration ribbons. And, roll
out a thin piece of Pink clay to make a butterfly knot
and stick on the tree trunk.
|
 |
| 15.
Roll out a thin piece of White clay and a thin piece of
Red clay to make two spaghetti-like tubes. |
 |
| 16.
Twist the White and Red tubes together to make a candy
stick. |
 |
|
17.
Finish the candy stick.
|
 |
| 18.
Repeat Step 1 to Step 7 to prepare three more penguins,
then, stick on the tree. Roll out thin pieces of Blue
clay, Yellow clay, Red clay and Purple clay to make scarfs
and stick them on the penguins’ necks. Stick the
candy stick on the tree |
 |
| Final.
Pierce a hole on the top of the tree. Thread with a thin
red ribbon or gold cord through the hole in the clay.
Write names to personalize. |
 |
Clay
