Skill
Level - Intermediate
Time to Complete -1 hour each (Does not include drying
time)
Supplies: * Makin's Clay® - The No Bake Clay®
*
No Kneading, conditioning, or baking required!
60g
Yellow clay
Recommended
Tools:
Makin's Brand® Mallet
Other
Materials:
Aleene's Original Tacky Glue
Plastic
Suction Hook
1.
Take out about 3/4 of the clay from a pack of 120g Makin's
Yellow Clay, wrap up the remaining clay and place in a
plastic bag for future use. Roll out a rectangle (45mm (L) x
22mm (W)) with a thickness of 12mm.
2.
Use plastic suction hook to make a hole in the previously
made pendant. Take out a little of Yellow Clay to make the
head (14mm diameter).
3.
Use Makin's Brand® Mallet to cut the pendant's
center point to make the legs.
4.
Use
Makin's Brand® Mallet to smooth the legs.
5.
Pierce a curve to separate the legs using Makin's Brand®
Mallet.
6.
Take
out a little of Yellow Clay to make the hands (35mm diameter)
and use Makin's Brand® Mallet to smooth them. Stick
hands with white glue.
7.
Use
Makin's Brand® Mallet to make different pictures
for the hands.
8.
Stick the left hand and the right hand together with white
glue.
9.
Stick the head on the top of the body using white glue.
10.
Use your hand to stabilize the head and the body.
11.
Insert part of the plastic suction hook into the back of
the pendant.
Final.
Repeat the above procedure to make two more pendants of
different shapes if you like.
Clay
